十分六合彩官网

新闻中心您现在的位置:首页 > 新闻中心 > 爱泽工业2018年4月部分到货——MR CHEMIE渗透剂篇
爱泽工业2018年4月部分到货——MR CHEMIE渗透剂篇
发布时间:2018-04-20   点击次数:603次

爱泽工业2018年4月部分到货产品专题及库存

——MR CHEMIE渗透剂、磁悬液、清洁剂篇

 

如下为我司爱泽工业IZE_Industries本月部分到货MR CHEMIE相关产品,索取样本资料和产品信息。

 

image.png

MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

 

德国MR CHEMIE清洁剂MR85产品描述

General appearance and composition:

Mixture of solvents based on alcohol, method C according to EN ISO 3452-1

Dries slowly

Flash point material +13 °C

Suitable for all metals (suitability for plastics needs testing prior to use)

Processing temperature -10 to +50 °C

Aerosol can overhead sprayable

 

Relevant approvals and specifications

Sample testing acc. to EN ISO 3452-2 and ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2

and ASME Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted

by Framatome ANP

 

Application:

Remove tinder, rust and other contaminations from surface in a suitable manner.

You can use MR85 Remover as precleaner for removal of oils or fats.Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.Remove excess MRPenetrant from surface using a clean lint-free cloth lightly

moistened with MR85 Remover.Spray MR Developer (e.g. MR70) from a distance of approx. 20 cm on the dry

surface, achieving a thin, uniform layer. Depending on the used penetrant, surface

defects will appear as red or fluorescent indications. Please note: If the developer

layer is too thick tiny discontinuities will not appear through the developer.

 

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L, 200 L

Valve pen (Piccolo-Pen)

 

image.png

MR CHEMIE清洁剂MR85爱泽工业izeindustries发货照片

 

爱泽工业(IZE_INDUSTRIESMR CHEMIE)特价经销、常用备件型号:

MR CHEMIE清洁剂MR79

MR CHEMIE清洁剂MR85

MR CHEMIE清洁剂MR88

MR CHEMIE清洁剂MR91

 

德国MR CHEMIE显像剂MR70产品描述

General appearance and composition:

Solvent removable developer for red and fluorescent penetrant testingform d and e according to EN ISO 3452-1

Water mixable

Dries quickly

Processing temperature -30 °C to +50 °C

Aerosol overhead sprayable

 

Relevant approvals and specifications

Sample testing acc. to EN ISO 3452-2 and EN ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2and ASME Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas,admitted by Framatome ANP

Produits et Matériaux Utilisables en Centrales (PMUC)

TLV 9017 01:2011-01

 

Application:

Remove tinder, rust and other contaminations from surface in a suitable manner. A

possible precleaner for removal of oils or fats is e.g. our remover MR 79.

Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.

Remove excess MRPenetrant from surface either using water or a clean lint-free

cloth lightly moistened with an MR Remover.

Spray MR 70 Developer from a distance of approx. 20 cm on the dry surface,

achieving a thin, uniform layer. Depending on the used penetrant, surface defects

will appear as red or fluorescent indications. Please note: If the developer layer istoo thick tiny discontinuities will not appear through the developer.

When using a spray gun connected to compressed air it must be ensured that the

supplied air is free of water and fat.

 

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L

Valve pen

 

image.png

MR CHEMIE显像剂MR70爱泽工业izeindustries发货照片

 

爱泽工业(IZE_INDUSTRIESMR CHEMIE)特价经销、常用备件型号:

MR CHEMIE显像剂MR70

MR CHEMIE显像剂MR81

MR CHEMIE显像剂MR703W

MR CHEMIE显像剂MR703WK

 

MR CHEMIE磁悬液MR76S composition:

Mixture of isoparaffinic carbonhydroxides, additives and pigments

Serves to indicate cracks when performing coloured magnetic particle inspection

Medium particle size da = 1-3 µm

Flashpoint 84°C

Sediment: 0,4 – 0,8 ml/100 ml (1 h)

Low odour

Aerosol cans over head sprayable

 

MR CHEMIE磁悬液MR76S的组成:

异链烷烃碳氢化合物,添加剂和颜料的混合物

用于在进行彩色磁粉检查时表示裂纹

中等粒径:da = 1-3 µm

闪点84°C

沉淀物:0.40.8ml / 100ml(1小时)

低气味

气溶胶罐头可喷雾

 

image.png

MR CHEMIE磁悬液MR76S爱泽工业izeindustries发货照片

 

爱泽工业(IZE INDUSTRIES)特价经销、常用备件型号:

MR CHEMIE渗透剂MR®67

MR CHEMIE渗透剂MR®67DL

MR CHEMIE渗透剂MR®67PS

MR CHEMIE渗透剂MR®68NF

MR CHEMIE渗透剂MR®68H

MR CHEMIE渗透剂MR®68C

MR CHEMIE渗透剂MR®312

MR CHEMIE渗透剂MR®311-R

MR CHEMIE渗透剂MR®313

MR CHEMIE渗透剂MR®313DL

MR CHEMIE渗透剂MR®699FA

MR CHEMIE渗透剂MR®660

MR CHEMIE渗透剂MR®670F

MR CHEMIE渗透剂MR®671F

MR CHEMIE渗透剂MR®672F

MR CHEMIE渗透剂MR®673F

MR CHEMIE渗透剂MR®70

MR CHEMIE渗透剂MR®70H

MR CHEMIE渗透剂MR®81T-R

MR CHEMIE渗透剂MR®703W

MR CHEMIE渗透剂MR®703WK

MR CHEMIE渗透剂MR®79

MR CHEMIE渗透剂MR®85

MR CHEMIE渗透剂MR®88

MR CHEMIE渗透剂MR®91H

MR CHEMIE渗透剂MR®3001

MR CHEMIE渗透剂MR®3002

 

image.png

MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

 

以上为本月部分到货MR CHEMIE产品,爱泽工业专业提供MR CHEMIE全系列产品,MR CHEMIE清洁剂MR85,MR CHEMIE显像剂MR70,MR CHEMIE磁悬液MR76S等等。

 

如果您有任何关于产品的相关疑问,请随时与我们,爱泽工业(021-3100 6702)。我们将尽全力解决您的问题。

 

If you have any question for MR CHEMIE, please feel free to dial or browse our website.

在线客服
电话
86-021-31006702
企业邮箱
sales@ize-industries.com
友情链接:8号彩票官网  1号彩票官网  1号彩票  1号彩票  1号彩票网  8号彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!